Follow

Install and Activate the Mini

To install the Mini on your network:

  1. Plug in the power cord and wait for the first LED light on the Mini to be solid.
  2. Connect the LAN port of the Mini to any of your existing network's LAN ports.
  3. Wait for the middle LED light on the Mini to start flashing
  4. From any device on the same network, use a web browser to visit activate.routerlimits.com.

NOTE: The WAN port, USB port, and switch on the Mini are not currently used. Holding the reset button will hard reset the Mini. If the Mini is reset it will need to be re-paired to your account.

RELATED: LED Lights on the Mini

If you reached this page when trying to activate, and you've followed the above steps, CLICK HERE to try activating again.

 

CONNECTION DIAGRAM:

 

 

Keywords: RL-Mini, mini, setup mini, initial install, setting up the mini, installing the mini, activating the mini, activate the mini, set up the mini, set up mini, installing the mini, mini setup, mini install

 

 

 

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request